Table of Contents
Advertisement
VIVOTEK
General Connection (without PoE)
1. Connect RJ45 Ethernet cable to a switch.
2. Connect the power cable from the Network Camera to a power outlet.
3. If you have external devices such as sensors and alarms, make the connection from the
general I/O terminal block.
IMPORTANT:
If DC power is preferred, it should comply with: O/P: 12VDC, 2A min., L.P.S. per IEC 60950-1.
Install the "Installation Wizard 2" software utility from your software CD.
The program will search for VIVOTEK Video Receivers, Video Servers or Network Cameras on
the same LAN.
Double-click on the camera's MAC address to open a browser management session with the
camera.
With a live view is displayed on your laptop, adjust the zoom and focus to obtain an optimal
image. Check the live view to ensure the image is in focus.
20 - User's Manual
1
3
+5V : Power, 5V DC
+5V
DO : Digital Output
DO
DI : Digital Input
D1
GND : Ground
GND
General I/O Terminal Block
Power Cord Socket (Black)
Microphone In (Pink)
Audio Out (Green)
2
Advertisement
Table of Contents
