WLAN specifications
Type of network
Transfer rate
Active frequency
Typical operating distances**
Number of channels
Security
Maximum recommended number of computers
to be connected over wireless LAN (during ad
hoc connection)
* "Wi-Fi based" indicates that the interconnectivity test of the organization which guarantees the
interconnectivity of wireless LANs (Wi-Fi Alliance) was passed.
** The operating distances given above increase or decrease depending on factors such as the
number of walls, reflecting material or interference by external RF sources.
*** Network key encryption (WEP) occurs with the number of bits given above, after deduction of
the fixed length of 24 bits the user may however also set 40 or 104 bits.
**** Depending on the particular practical application, the number of computers which can be
networked is reduced if necessary.
Fujitsu
Integrated Dual-Band Wireless-N 7260 device
conforms to IEEE 802.11a, 802.11b/g, and
802.11n, Wi-Fi based*.
(Automatic switching) IEEE802.11 a and g: 54
Mbps max. data rate; IEEE802.11n: 300 Mbps
max. data rate
•
802.11n: 2.4 GHz or 5 GHz
•
802.11b/g: 2400~2473 MHz
•
802.11a: 4900~5850 MHz
•
802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.
(91 m) @ 6 Mbps
•
802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.
(91 m) @ 1 Mbps
•
802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.
(91 m) @ 1 Mbps
•
802.11n: Estimated double the operating
distance of 802.11g and 802.11a in their
respective frequencies
•
802.11a: 8 independent channels
•
802.11b/g: 11 channels, 3 non-overlapping
channels
•
802.11n: Channel bonding takes two of
the non-overlapping 20MHz channels and
combines it into one 40MHz channel. It is
actually 12 non-overlapping channels with
channel bonding and 24 without. Also it is 1
non-overlapping channel in 2.4GHz when
channel bonding is used.
Encryption types: compatible with WEP, TKIP,
AES***, WPA 1.0 and WPA 2.0
Encryption key, lengths supported: 64 bits and
128 bits
10 units or less ****
Technical data
79