Philips PET1030 Series Service Manual page 10

4.0 MECHNICAL INSTRUCTIONS
1. Side view as Fig.1
Remove base cover adorn discreteness as Fig.1.
Fig.1
2. Remove screws of the base cover as Fig.2.
Fig.2
3. Remove screws of the base cover as Fig.3
Fig.3
4. Open the door and remove screws to remove
door & middle cabinet discreteness as Fig.4.
Fig.4
5. Rotate the top and remove screws to break
the top and the base away as Fig.5.
Fig.5
6. Disconnect DVD driver from board,
then soldered short pattern for
laser diode as Fig.6.
Fig.6
7. Remove screws to remove lithium battery and
lithium battery protective pcb as Fig.7.
Fig.7
8. Remove screws to remove mian board as Fig.8.
Fig.8
soldered