Philips PET1031/93 Quick Start Manual

Philips Portable DVD Player PET1031

Quick start guide

1

Charge

3
Switch the set.
1 OFF
Connect the supplied adaptor to the set and
2
the ACoutlet.
3 The RED light comes on.
The battery pack will be fully charged in
4
approximately 5 hours. When the RED
goes off, it means that thebattery pack is fully
charged.
Your battery will continue to charge while
TIP:
the player is inuse. However, the RED light will
not appear and it will takeapproximately 12 hours
to fully charge the battery pack.
2

Enjoy DVD

1
7
4 6 3
the lid.
1 Open
Press and hold .
2 POWER
3 The GREEN light turns on.
4 Open the DVD door by sliding the
5 Remove protective card (if any).
light
6 Load the DVD disc.
Close the DVD door and the set will
7
automatically startto play.
8 Use the control keys on the set or the remote
control.
3

Connect to TV

1 2 AV OUT SD/MMC CARD
3
2
1 Connect the set to the TV as shown.
2 Please select an appropriate input or source on the
TV. You can consult the owner's manual of your
TV. (If yourTV does not have Audio and Video
OPEN .
inputs, you will needto purchase a RF modulator.
Please consult your dealerfor more information.)
For better video quality,please use
TIP:
connection (see User Manual section
4

Swiveling LCD screen

You can swivel the LCD screen
S VIDEO COMP.OUT DV 9V-12V
of this player clockwisea
maximum of 180° for use.
COMP.OUT
6.2.6 )