Ftp - D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an FTP server.
Host Name:
Enter the IP address of the FTP server that you will be connecting
to.
Port:
Enter the port of the FTP server that you will be connecting to.
User Name:
Enter the user name of your FTP server account.
Password:
Enter the password of your FTP server account.
Path:
Enter the destination path/folder to save files to on the FTP
server.
Passive Mode:
Enabling passive mode may help you reach your FTP server if
your camera is behind a router protected by a firewall.
Enable the
Enabling this will allow snapshots to be uploaded in different
uploading of
ways:
images to an
FTP server: • Choosing Always will upload snapshots continuously
based on the Image Frequency specified.
• Choosing Schedule will allow you to schedule when to
start and stop the uploading of snapshots.
• Select Motion/Sound Detection if you would like the
camera to upload images only when motion is detected.
D-Link DCS-5030L User Manual

FTP

46 46