Configuration; Using The Web Configuration Interface - D-Link DCS-5030L User Manual

Table of Contents

Section 3 - Configuration

After completing the Camera Installation Wizard, your camera is ready to use. The camera's built-in web configuration interface

is designed to allow you to easily access and configure your DCS-5030L. There are two ways in which you can access your

camera's web configuration interface:

• Log in to your mydlink account to access your camera's configuration interface.

• You can also access the interface locally by entering the IP address of your camera into a web browser, such as Internet

Explorer

. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create

a password, leave the password field blank. After entering your password, click OK.

Note: If you are directly connecting your camera to your PC, or if you are using the camera on a closed network, the default IP

is 192.168.0.20. If the camera is connected to a router or network, a different IP address may have been assigned.

D-Link DCS-5030L User Manual

Configuration

DCS-5030L

Table of Contents