Table of Contents
Advertisement
When choosing the lens for your camera, please notice the specifications as below. The
screw mount (distance A-C) must be shorter than 5.2mm; in case that the bottom of screw
mount may hit the IR Cut Filter.
5. Install a MicroSD card, and, if preferred, connect DI/DO wires to the terminal block The
AC/DC pins can accept either 12V or 24V power input with no polarity.
M
icro
SD
The DO pin can provide a 5V output, and the max. load is 50mA.
DO+
DO-
DI1+
DI2+
DI3+
DI- (common GND)
RS485-
RS485+
AC/DC+ pw
AC/DC- pw
VIVOTEK
User's Manual - 7
Advertisement
Table of Contents
