Hyundai GR 009 Instruction Manual page 29

– Do not use the grill to heat a room!
– Never submerge the socket thermostat under water (even partially) and do not wash
under running water!
– Do not leave the grill on without supervision and supervise it for the entire time that food
is being prepared.
– It is not permissible to adjust the surface of the appliance in any way (e.g. by means
of self-adhesive wall-paper, foil, etc.)!
– Do not place any objects on the appliance.
– Do not use the appliance in an environment saturated with explosive or flammable steams.
– Do not place the appliance near objects or under objects which could get damaged by steam, e.g.
walls, kitchen cupboards, sideboards, paintings, or curtains. Leaking steam could damage them.
– Use quality oil or fat recommended for roasting by the manufacturer.
– When roasting fatty meat or sausages, beware of splashes of fat.
– Do not allow water, or food containing water, to freeze in the pot. It could damage the pot (crack it).
– Do not touch the grill, nor the wind shield, while still hot.
– Do not use the grill unless correctly assembled.
– Do not use the grill if it is wet, your hands are wet or on a wet surface!
– Do not use the grill unless there is water in the dripping tray. If the water level drops unter the
MIN mark, turn off the grill and pull the fork of the supply cord from the socket. Then fill in water!
– Do not cover the grate with a aluminium or any other kind of foil.
– Avoid contact between the grill rack and spiral filament, otherwise it may cause damages.
– WARNING: charcoal or similar combustible fuels must not be used with this appliance.
– Remember to place the thermostatic cabinet into the base. The appliance can't be used without the
thermostatic cabinet correctly fitted. The thermostatic cabinet is equipped with safety switch. The
safety switch will automatically turn off the heating elements when thermostatic cabinet is removed.
Do not touch the surface for the filament has extremely high temperature shortly after using.
– Use only original thermostat intended for HYUGR009
– Do not use the grill for other purposes (e.g. for drying textile products, shoes, etc.) than those
recommended by the manufacturer.
– Do not place the grill on unstable, fragile or flammable surfaces (e.g. glass, paper, plastic,
wooden-varnished boards and various fabrics/tablecloths).
– Use the grill only in the working position in places, where there is no risk of it being knocked over and
at a sufficient distance from flammable objects (e.g. curtains, drapes, wood, etc.), sources of heat
(e.g. fire stoves, stoves, etc etc.) and wet surfaces (kitchen sinks, wash basins etc.).
– Before frying remove any food packaging (e.g. paper, PE-bag, etc.).
– When grilling spontaneous combustion of foods is possible. If sudden combustion (fire) occurs,
disconnect the appliance from the power grid and put the fire out.
– For additional protection we recommend installation of current protection (RCD) with the nominal
release current not exceeding 30 mA. Ask a control technician or an electrician for advice.
– Before every connection to the power grid make sure that the temperature control dial is in the
position MIN. After finishing work and before any maintenance always turn the temperature
control dial to the position MIN and disconnect the appliance from the electrical grid by pulling
the power cord plug from the power socket.
– Do not carry the appliance when it is hot, if by chance it is tipped over there is a danger of
a burn injury.
– The power cord must not be damaged by sharp or hot objects, by an open flame and it must not be
submerged under water. Never place it on hot surfaces and do not leave it hanging over the edge
of a table or a work bench. If the cord is brushed against or tripped over or pulled by for example
children the appliance may tip over or be pulled down and lead to serious injuries!
– The appliance is portable and is equipped with a flexible power cord with a plug, which ensures
a bipolar disconnection from the electricity grid.
– If the use of an extension cord is necessary, then it must not be damaged and must meet the
valid norms in force.
29 / 43
ENG