Pioneer AVIC-F930BT Installation Manual page 11

Connecting the system
The navigation unit
Fuse (10 A)
Power cord
RCA connector
15 cm
Yellow/black
If you use an equipment with mute function, connect that
equipment to the Audio Mute lead. If not, keep this lead free of any
connections.
Note
Audio source will be set to mute or attenuate, while the following
sounds will not be muted or attenuated. For details, refer to
Operation Manual.
— Voice guidance of the navigation
— Incoming ringtone and incoming voice of the mobile phone
that is connected to this navigation system via Bluetooth
wireless technology
Blue/white (*6)
The pin position of the ISO connector will differ
depending on the types of vehicles. Connect *6
and *7 when Pin 5 is an aerial control type. In
other types of vehicles, never connect *6 and *7.
Blue/white (*7)
To auto-aerial relay control
terminal (max. 300 mA 12 V DC).
Section
02
11
Engb