Vizio M50-D1 User Manual page 51

To adjust the audio settings:
• Speakers (Display Speakers) -
Turns the built-in speakers on or
off. Select Auto to have the display
automatically detect if there are
any devices (such as a sound
bar) connected to the Audio Out
output ports.
• Surround Sound - Surround sound
uses DTS TruSurround
an immersive surround sound
experience from the display's
internal speakers. TruSurround
completes
experience by providing deep, rich
bass and by delivering crisp details
and clear, intelligible dialog. Swipe
the switch left to disable and right
to enable.
• Volume Leveling - Volume leveling uses DTS TruVolume
consistent volume levels during transitions between program content, AV
formats, and input sources. Swipe the switch left to disable and right to
enable. In a few cases, volume leveling may artificially suppress volume
increases, making it difficult to hear dialog or flattening sudden noises. If
this occurs, turn volume leveling off.
• Balance - Adjusts the loudness of the audio output from the left and
right speakers.
• Lip Sync - Adjusts the synchronization between the display image and the
accompanying audio track.
• Digital Audio Out - Changes the type of processing for digital audio out
and HDMI ARC output when connected to a home theater audio system.
Select Auto, PCM, Dolby, or Bitstream.
• Analog Audio Out - Sets the volume control properties for the RCA
connector when connected to a home theater audio system. Select Variable
if you are controlling the volume with the TV's volume controls, or select
Fixed if an external audio device (sound bar or AV receiver) will control
the volume.
• Mute - Mute all audio from the display.
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
to deliver
™
the entertainment
51
3
to maintain
™