Installing The Memory Module; Removing The Heatsink - Dell Vostro 24-5460 Owner's Manual

a. stand
b. back cover
3. Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory
module from its connector.

Installing the Memory module

NOTE: Please use DIMM 2 slot if there is only one memory module available.
1. Align the notch on the memory module with the tab on the system-board connector.
2. Press down on the memory module until the retention clip spring back to secure them in place.
3. Install:
a. back cover
b. stand
4. Follow the procedures in

Removing the Heatsink

1. Follow the procedures in
2. Remove:
a. stand
b. back cover
3. Remove the screws that secure the heatsink to the system board [1,2,3,4,5,6,7].
NOTE: Loosen the screws in the order of the callout numbers [1, 2, 3, 4, 5, 6, 7]. Except for
screw [7], the rest of the screws are retention screws and cannot be fully removed.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
11