Table of Contents
Advertisement
Disassembly
1.
Relieve pressure; page 4.
2. Remove pump (13); Displacement Pump
Replacement, page 17.
CAUTION
Do not drop gear cluster (7) when removing drive
housing (10). Gear cluster may stay engaged in
motor front end bell or drive housing.
3. Remove drive housing (10); Drive Housing
Replacement, page 15.
4. Remove four screws (18) and cover (39).
5. Disconnect all leads from board (35). Remove five
screws (36) and board.
35
36
18
39
Liberally apply grease
1
Fig. 9
16
824191
Motor Replacement
22
6. Remove strain relief (37, page 12, 13, 14).
7. Remove three screws (22) behind board and
remove control housing (21).
8. Remove four screws (22) and motor (1) from
frame (63).
Assembly
1. Install new motor (1) on frame (63) with four
screws (22).
2. Install control housing (21) with three screws (22).
3. Install strain relief (37, page 12, 13, 14).
4. Install board (35) with five screws (36). Connect all
leads to board (35).
5. Install drive housing (10); Drive Housing
Replacement, page 15.
6. Install pump (13); Displacement Pump
Replacement, page 17.
1
1
1
22
7699B
Advertisement
Table of Contents
