Drive Housing Replacement
CAUTION
Do not drop gear cluster (7) when removing drive
housing (10). Gear cluster may stay engaged in
motor front end bell or drive housing.
Disassembly
1.
Relieve pressure; page 4.
2. Remove pump (13); Displacement Pump
Replacement, page 17.
3. Fig. 8. Tip sprayer up. Remove screw (74c) and
remove shroud (74).
4. Remove two front screws (22).
5. Remove two back screws (22).
6. Pull drive housing (10) off of motor (1).
A
Fig. 8
Assembly
1. Push drive housing (10) onto motor (1)
2. Install two front screws (22).
3. Install two back screws (22).
4. Fig. 8. Tip sprayer up. Install shroud (74) with
screw (74c).
5. Install pump (13); Displacement Pump
Replacement, page 17.
6. Instal new access cover (10a) with two screws
(10b).
74
1
22
7
74c
10
10a
74c
10b
22
9581A
9582A
15
824191