Upgrade The Firmware; Backup And Restore Configuration Settings - TP-Link TL-WA830RE User Manual

300mbps wi-fi range extender
Hide thumbs Also See for TL-WA830RE:
Table of Contents

Advertisement

Chapter 5
5. 3.

Upgrade the Firmware

TP-LINK is dedicated to improving, richening the product features and giving you a
better network experience. You can download the latest firmware file from the
page of our website
www.tp-link.com
Note:
1. Make sure the latest firmware file is matched with the hardware version (as shown in the download section of
the Support page).
2. Make sure that you have a stable connection between the extender and your computer. It is NOT recommended
to upgrade the firmware wirelessly.
3. Backup your extender configuration.
4. Do NOT power off the extender during the firmware upgrade.
¾ To upgrade the firmware:
1. Download the latest firmware file for the extender from our website
com.
2. Visit http://tplinkrepeater.net, and log in with the username and password you set for
the extender.
3. Go to
Settings
>
System Tools
4. Click
Browse
to locate the downloaded new firmware file, and then click Upgrade.
5. Wait a few minutes for the upgrade and reboot.
5. 4.

Backup and Restore Configuration Settings

The configuration settings are stored as a configuration file in the extender. You can
backup the configuration file and restore the extender to the previous settings from
the backup file when needed. Moreover, if necessary, you can erase the current settings
and reset the extender to the default factory settings.
1. Visit http://tplinkrepeater.net, and log in with the username and password you set for
the extender.
2. Go to
Settings
>
System Tools
¾ To backup configuration settings:
and upgrade the firmware to the latest version.
>
Firmware
Upgrade.
>
Backup &
Restore.
Manage Your Extender
Support
www.tp-link.
25

Advertisement

Table of Contents
loading

Table of Contents