Upgrade The Firmware - TP-Link PGW2440 User Manual

Chapter 3
3. Click BROWSE to locate the backup configuration file stored on your computer,
and click RESTORE. The configuration file is config.bin.
4. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not turn off or reset the extender.
• To reset the extender to factory default settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log
in with the password you set for the extender.
2. Go to System > Backup & Restore
3. Click FACTORY RESTORE
4. Wait a few minutes for the resetting and rebooting.
Note:
1. During the resetting process, do not turn off the extender.
2. We strongly recommend you back up the current configuration settings before resetting the extender.

3 11 4 Upgrade the Firmware

TP-Link is dedicated to improving and richening the product features, giving
you a better network experience. We will release the latest firmware at TP-Link
official website, you can download the latest firmware file from our website:
www.tp-link.com and upgrade the firmware to the latest version.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log
in with the username and password you set for the extender.
2. Go to System > Firmware Upgrade
> Factory Default Restore
to reset the extender.
page and confirm the
page.
Hardware Version.
28