TP-Link TL-WA830RE User Manual page 15

Chapter 3
¾ To extend another host network
1. Go to Settings > Wireless
2. Enable Connect to 2.4GHz Network
networks.
3. Select the host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
· Move the extender closer to your router, and click
· You can manually enter the parameters of the network you want to extend, and click Save.
4. Once a host network is selected, the SSID and security type will be automatically
filled in. If the selected network is encrypted, enter the password in the
field.
5. Click Save.
¾ To enable or disable the extended network:
1. Go to Settings > Wireless
2. The wireless radio is enabled by default. If you want to disable the wireless function
of a certain band, just clear the
of this band will be invalid.
3. Click Save.
¾ To change the wireless network name (SSID):
1. Go to Settings > Wireless
2. Create a new SSID in
sensitive.
3. Click Save.
Note:
If you change the wireless settings via a wireless device, you will be disconnected after the settings are applied.
Please write down the new SSID for future use.
> Connect to Network.
and click
Rescan
> Extended Network.
Enable checkbox. In this case, all the wireless settings
> Extended Network.
Extended 2.4GHz SSID
Wireless Scanner
on the top-right corner of the list.
or click Copy Host SSID. The value is case-
Customize Your Network
to find all available
Password
13