General Guidelines - Elation PIXEL BAR 12 User Manual

Table of Contents

Advertisement

G E N E R A L G U I D E L I N E S
N E V E R
O P E N
D O N O T C O N N E C T T H I S D E V I C E T O A D I M M E R P A C K !
This fixture is a professional lighting effect designed for INDOOR / DRY LOCATIONS
ONLY on stage, in nightclubs, theatres, etc.
Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while
operating, to prevent any fire hazard.
Device must be installed in a location with adequate ventilation.
Smoke fluid residue, dust and any excessive particle residue will degrade product
performance, cause overheating and damage fixture. Damages caused by
inadequate cleaning or maintenance are not covered by product warranty.
attempt installation and/or operation without knowledge how to do so.
DO NOT
DO NOT
permit operation by persons who are not qualified to operate this type
of fixture. Most damages are the result of operations by nonprofessionals.
Consistent operational breaks may ensure the fixture will function properly for
many years to come.
DO NOT
shake fixture, avoid brute force when installing and/or operating fixture.
Always install the fixture with an appropriate safety cable. When installing the
fixture in a suspended environment, always use mounting hardware that is no less
than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw
holes in the bracket of the fixture.
Use the original packaging and materials to transport the fixture in for service.
DO NOT TOUCH
and allow approximately 15 minutes for the fixture to cool down before replacing
or serving.
T H I S
F I X T U R E
the housing bare-hand during its operation. Turn OFF the power
w w w . e l a t i o n l i g h t i n g . c o m
W H I L E
8
PIXEL BAR 12 / 20 / 40™ User Manual
I N
U S E !

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixel bar 20Pixel bar 40

Table of Contents