Fixture Installation - Elation PIXEL BAR 12 User Manual

F I X T U R E I N S T A L L A T I O N
C A U T I O N S
For added protection, mount the fixture in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
Ambient operating temperature range for this fixture is
Do not use the fixture below or above this temperature.
Before mounting the fixture to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the fixture.
Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable.
Never stand directly below the device when mounting, removing or servicing.
DEVICE LINKING TO SINGLE PIXEL NET 4
Maximum number of bars that can be power linked to a single PIXEL NET 4
PIXEL BAR12 ™ - Max 52 bars (13 per each output port)
PIXEL BAR20 ™ - Max 32 bars (8 per each output port)
PIXEL BAR40 ™ - Max 16 bars (4 per each output port)
*CAT5e cable length from PIXEL NET 4 port to last PIXEL BAR unit = 98.4 ft (30m) MAX
F L A M M A B L E M A T E R I A L W A R N I N G
Keep fixture at least 5.0 ft. (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L C O N N E C T I O N S
A q u a l i f i e d e l e c t r i c i a n s h o u l d b e u s e d f o r a l l
e l e c t r i c a l c o n n e c t i o n s a n d / o r i n s t a l l a t i o n s .
™
w w w . e l a t i o n l i g h t i n g . c o m
DEVICE
10
PIXEL BAR 12 / 20 / 40™ User Manual
32° to 104°F (0° to 40°C).
™ device: