Optional Tube Lens Installation - Elation PIXEL BAR 12 User Manual

T U B E L E N S I N S T A L L A T I O N
An optional frost tube lens can be installed to replace the included flat frost lens.
1. Remove End Plate (4) Screws.
3. Install Frost Tube Lens.
5. Replace End Plate and Tighten (4) Screws.
w w w . e l a t i o n l i g h t i n g . c o m
2. Remove Flat Frost Lens.
4. Make sure Tube is installed correctly.
13
PIXEL BAR 12 / 20 / 40™ User Manual