Ethernet Wan Connection - D-Link DSL-2640U Quick Installation Manual

DSL-2640U
6. For the PPPoE and PPPoA connection types, enter authorization data
provided by your ISP in the PPP section (the username (login) in the
Username field and the password in the Password and Password
confirmation fields). If these data have not been provided by your ISP,
select the Without authorization checkbox.
7. For the IPoA and Static IP connection types, fill in the IP Address,
Netmask, and Gateway IP address fields in the IP section.
8. Deselect the NAT checkbox in the Miscellaneous section if your ISP
requires you to disable the network address translation function.
9. Click the Save button.

Ethernet WAN Connection

1. Go to the Advanced / Interface grouping page.
2. Place the mouse pointer on the router's LAN port that will be used as the
WAN port and click the Make WAN line in the menu displayed. Click
the Save link.
3. Go to the Net / WAN page and click the Add button.
From the Connection Type drop-down list, select the needed value.
4.
Quick Installation Guide
17