Cobranet Input Routing - Crown PIP-LITE Reference Manual

Networked PIP Series
System Name
This parameter is user-settable to any alpha-numeric string of 30 characters or less. The
intended use is to communicate a unique name for the particular device to a network. The
System Name object is stored in presets.
System Description
This parameter is configured at the factory and is read-only. The intended use is to commu-
nicate a unique device description to a network.
System Location
This parameter is user-settable to any alpha-numeric string of 30 characters or less. The
intended use is to communicate a unique description of the device location to a network.
This object is stored in presets.
System Contact
This parameter is user-settable to any alpha-numeric string of 30 characters or less. The
intended use is to communicate the designated contact person (in case of service or other
network issue) to the network. This object is stored in presets.
Firmware Version
This parameter is configured at the factory and is read-only. The intended use is to commu-
nicate the presently loaded CobraNet module firmware version to a network.
MAC Address
This parameter is configured at the factory and is read-only. The setting defines a unique
IEEE802-recognized address for use with any Ethernet based network.
IP Address
This IP address is for the CobraNet control ONLY. It is used by SNMP agents such as
CobraNet Disco to control CobraNet specific functions.
This IP address should not be confused with the control system's IP address that is used to
control and monitor the USP3/CN.

5.5.2 CobraNet Input Routing

CobraNet input routing includes the following controls:
CobraNet Receive Bundles
The PIP-USP3/CN can receive four unique CobraNet Bundles (RxA, RxB, RxC, RxD). Each
Bundle includes an "Active" indicator to indicate whether the particular Bundle is being
actively transmitted onto the network.
*For the most comprehensive information available on CobraNet technology, visit Peak
Audio's CobraNet website at www.peakaudio.com.
**CobraCAD is a software tool that provides a simple graphic user interface for the design
of CobraNet networks. It is available for download from Peak Audio's website at
www.peakaudio.com.
Reference Manual
page 43