Page 3
P.I.P.–ATNJ 1 Welcome Thank you for purchasing the Crown P.I.P. ® –ATNJ accessory. PIP grammable Input Processor) mod- ules are designed to quickly install in the rear panel of Crown Com-Tech Macro-Tech ® or Studio Reference se- ries amplifiers. Their versatile features...
2 Installation Before installing this PIP module, it will need to be configured. The first two steps in the installation procedure fo- cus on this. A phillips screwdriver is required. CAUTION: Before installing this or any PIP in your amplifier, it is important to turn down the amplifier’s level controls, turn off the amplifier and disconnect the AC power.
Page 5
Do NOT change the circuitry. Unautho- rized circuit modifications, void the war- ranty. Remember: Crown is not liable for dam- age resulting from overdriven compo- nents in your sound system. Page 5...