Register Handset With An Additional Base - BT EQUINOX 1350 User Manual

5. At the base: press and hold
beeps. The display shows
6. The handset screen will show the base ID number.
OK
Press to confirm. The handset screen then shows
Handset Registered
and is given the first available handset number. You can
now use the handset.

Register handset with an additional base

A handset registered with one base can then be registered
with up to three more bases, e.g. at work, at home, or at
a relative's home.
1. Press MENU then scroll
2. Register Handset
3. Scroll or to select the base. Press OK.
4. Enter the selected base's SYSTEM PIN (original setting
0000). Press OK.
5. At the base: press and hold
beeps. The display shows
6. The handset screen shows the base ID number, press
OK. The handset reverts to standby and is given the first
available handset number. It is now registered to the new
base and ready for use.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576
until the base
Registration .
. The handset reverts to standby
to Registration
is highlighted. Press OK.
until the base
Registration .
Additional handsets and bases
To register a GAP compatible
handset to your BT Equinox base,
please refer to the instructions
supplied with the handset you are
trying to register. Please note that
you will not be able to access the
answering machine facilities using
and press OK.
a GAP compatible handset and
other features may be limited.
All the bases that a handset can be
linked to are indicated by an ,.
87