Advertisement
Available languages
Available languages
GB
F
D
GENERAL SAFETY RULES
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from intened could result
in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack
into power tools that have the switch on invites
accidents.
b) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
c) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
SPECIFICATIONS
Model
Voltage
Chuck (mm)
Switch
No load speed (drill mode):
- Lo speed
- Hi speed
No load speed (impact mode):
- Lo speed
- Hi speed
Max. Torque (Nm)
Weight - incl. battery pack (KG)
Battery pack:
Charger
E
I
P
NL
CDD-1202
12 V
13
Variable speed
0 - 350 min-
1
0 - 1250 min-
1
-
-
30
1.9
BPP-1220
BC-1200 /
BC-1215-S
S
DK
N
FIN
English
d) When battery pack is not in use, keep it away
from other metal abjects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
e) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
7) SPECIAL RULES
a) Wear ear protectors with impact drills. Exposure to
noise can cause hearing loss.
b) Use auxiliary handle supplied with the tool. Loss
of control can cause personal injury.
CDD-1442
CDI-1442
14.4 V
14.4 V
13
13
Variable speed
Variable speed
0 - 350 min-
1
0 - 390 min-
0 - 1250 min-
1
0 - 1350 min-
-
0 - 5070 min-
-
0 - 17550 min-
32
32
2.1
2.3
BPP-1420
BPP-1420
BC-1440 /
BC-1440 /
BC-1415-S
BC-1415-S
8
GR
H
CZ
RUS
CDI-1802
18 V
13
Variable speed
1
0 - 400 min-
1
0 - 1400 min-
1
0 - 5200 min-
1
0 - 18200 min-
35
2.5
BPP-1820
BC-1800 /
BC-1815-S
RO
PL
1
1
1
1
Advertisement
