Table of Contents
Advertisement
Assembly and Use for the Blender - cont.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Stacked Blades are sharp, not locked in place and removable, handle with care. When handling
the Stacked Blades, always hold them by the shaft.
IMPORTANT: Make sure that the motor base is plugged in for use.
USE
Fig. 7
Fig. 8
|
NOTE: Nutri Ninja
Ninja
®
iQ
Technology can sense which jar is on the motor
®
base. The function lights will illuminate depending on
which jar is placed on the motor base. (Fig. 6)
9
Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency
is reached.
NOTE: Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
10 To pause the appliance, press the selected speed or
Auto-iQ Program a second time. (Fig. 8)
11 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)
12 Turn the pitcher anticlockwise to remove and then lift
off the base. (Fig. 9)
9
0800 862 0453
Fig. 6
Blender System with Auto-
®
Fig. 9
Fig. 10
CAUTION: Never insert your hands in the pitcher
as the Stacked Blades are sharp. Always use a
spatula to dislodge food that has stuck to the
sides of the pitcher.
CAUTION: If using the pour spout, ensure that the
lid is fully locked onto the blender pitcher.
CAUTION: If pouring with the lid removed, ALWAYS
remove the blade assembly first before pouring.
13 Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents.
14 For thicker consistencies, remove the lid and blade
attachment carefully (by its shaft), then empty contents
from the container. To remove the lid, press the release
button on the lid and pull the lid handle up to a 90°
angle and lift the lid off the blender pitcher. (Fig. 10)
15 Make sure that the unit is unplugged when not in use.
16 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you. (Fig. 11)
REMOVAL
Fig. 11
Advertisement
Table of Contents
