Connections; Connecting To A Tv; Connecting To An Audio System - Samsung BD-J4500R User Manual

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to
the HDMI IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
✎
NOTES
 Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual
of your TV.
 When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for
the first time, the player automatically sets the HDMI output resolution to the highest supported by
the TV.
 A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
 To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI
cable.
 HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
8
You can connect the Blu-ray player to an audio system using illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
Connecting to an HDMI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product
to the HDMI IN jack on your receiver.
• Best quality (Recommended)
Audio
Video

Connecting to an Audio System

Audio