Editing Event Memory Timelines - Panasonic AV-HS410E Operating Instructions Manual

1. Basic operations

1-10-9. Editing event memory timelines

Insertion or modification of the events can be edited on the
timelines.
w Timeline
A timeline is a succession of events in the event memories
which have been joined together on the time axis.
w Event points and edit points
On a timeline, the position where an event has been
registered is called the event point, and the event currently
being edited is called the current event memory.
When there is an edit point between one event point and
another, the event point before the edit point serves as the
current event memory.
(Event "n" in the figure below)
<Event points and edit points>
Edit point
Event
"n"
w Event duration and total duration
The length of time as far as the next event is called the event
duration.
The total of all the event durations is called the total duration.
The present point in time on the timeline is called the current
time.
<How times are referred to>
Total duration
1s00f
Event Event
1
The event progresses
in this direction.
Current time
Event Event
"n"+1 "n"+2
Event duration
1s00f 1s00f
Event
2 3
The event stops.
Timeline editing flow
w Modifying registered event memories
1 Press the [EVENT MEM] button and light its indicator.
[EVENT MEM] button
DISPLAY
SHOT
STORE
MEM
STILL 1
EVENT RE
MEM CALL
CLIP 1
PLUGIN
DEL
MEM1
0/10
PLUGIN
EDIT
MEM2
MEMORY / WIPE PATTERN / 10 KEY
2 Press the [RECALL] button to light its indicator, and use
the P button and number keys (1 to 10) to select the
event memory to be modified.
 R efer to "1-10-3. Recalling the operations stored in
the memory (Recall)".
3 Press the [EDIT] button to establish the editing mode.
(At this point, the timeline of the selected event memory
is copied into the work area.)
The timeline appears on the built-in display, and events
can be inserted or modified.
4 Edit the timeline, and check what has been edited.
 R efer to the operations described later.
5 Register the event memory which has been modified.
 R efer to "1-10-2. Storing the settings in the memory
(Store)".
w Creating a new timeline
When this operation is performed, the timeline currently in the
work area is deleted.
If it is required, register it in the event memory.
1 Press the [EVENT MEM] button and light its indicator.
7.
2 Press the [EDIT] button to light its indicator, and press
3 Create the new timeline.
 R efer to the operations described later.
4 Register the event memory which has just been created.
 R efer to "1-10-2. Storing the settings in the memory
(Store)".
The timeline is edited in the work area.
After editing is completed, be absolutely sure to register
which has been edited.
52
MENU SELECT
7 8 9
XPT
DSBL
NEW COPY PASTE
STILL 2 TRIM IN REC
4 5 6 +
� /
PAGE
INS DEL MOD
CLIP 2 TRIM OUT STOP
1 2 3
＜ ＞ REV
TAKE
REV ENTER
＜ ＞
. C
＜ ＜ UNDO
＞ ＞
＜ ＜ ＞ ＞ TRIM OFF PLAY
MENU
INPUT
VMEM
BKGD
PATT
KEY
PATT