Setting Enable/Disable For The Aux1 Transition - Panasonic AV-HS410E Operating Instructions Manual

1. Basic operations
1-9-3. Setting enable/disable for the AUX1
transition
The AUX1 transition time and transition enable/disable can be
set.
1 Press the t button to light its indicator, and display the
Time menu.
2 Use [F1] to display the AUX1 BUS Trans sub menu.
3 When the transition time is to be set in frame units, use
[F4] for the setting.
4 When the transition time is to be set in second units,
use [F3] to set the seconds and [F4] to set the frames.
A ny time from 0 to 999f can be set. The time which can
be set when seconds are used as the display unit differs
depending on the system format.
59.94i:
max. 33s09f
50i: max. 39s24f
24PsF: max. 41s15f
5 Use [F5] to set enable or disable for the transition using
the Transition item.
Enable Enable
Disable
Disable
W hen disable has been set for the transition, the output
signals are switched with no transition when the output
signals set in AUX1 is switched.
59.94p:
max. 16s39f
50p: max. 19s49f
23.98PsF: max. 41s15f
44