Masking The Dsk Signals - Panasonic AV-HS410E Operating Instructions Manual

1. Basic operations

1-5-7. Masking the DSK signals

These steps are taken to mask the DSK signals using the
mask signal of the box pattern.
1 Press the d button to light its indicator, and display the
DSK menu.
2 Use [F1] to display the Mask sub menu.
3 Use [F2], and select the masking method using the
Mask item.
Off The DSK signals are not masked.
Manual
The area that is set using the Mask Adjust
sub menu is masked.
4:3
The signals are masked to the 4:3 aspect
ratio.
4 Use [F3] to set whether to invert the mask signal using
the Invert item.
On
The mask signal is inverted.
Off The mask signal is not inverted.
5 Use [F1] to display the Mask Adjust sub menu.
6 Use [F2] to [F5] to set the area to be masked.
Operation/
Parameter
F2/
DSK left position
Left
F3/
DSK top position
Top
F4/
DSK bottom position
Bottom
F5/
DSK right position
Right
The Left setting cannot exceed the Right setting (and
vice versa) and, similarly, the Top setting cannot exceed
the Bottom setting (and vice versa).
<DSK mask setting> (figure shows the default values)
Video signal range
50
TOP (25)
0
BOTTOM (-25)
-50
-50
38
Description of Setting range/
setting Initial value
−50.00 to 50.00/
−25.00
−50.00 to 50.00/
25.00
−50.00 to 50.00/
−25.00
−50.00 to 50.00/
25.00
Area where the DSK signal is effective
Area masked
(-25) (25)
0 50
LEFT RIGHT