Honda 2012 Odyssey Owner's Manual page 80

Indicator Name
System Message
Indicator *
Turn Signal
Indicators
High Beam
Indicator
Lights On
Indicator
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
( w , then goes off.
Comes on along with a beep when a
●
problem is detected. A system
message on the multi-information
display appears at the same time.
The turn signal indicators blink when
●
you operate the turn signal lever.
If you press the hazard warning
●
button, both indicators and all turn
signals blink at the same time.
Comes on when the high beam
●
headlights are on.
Comes on whenever the light switch
●
is on, or in AUTO * when the exterior
lights are on.
Explanation
While the indicator is on, press the
●
/ (information) button to see the
message again.
Refer to the Indicators information in
●
this chapter when a system message
appears on the multi-information
display. Take the appropriate action for
the message.
The multi-information display does not return
●
to the normal screen unless the warning is
canceled, or the / (information)
button is pressed.
Does not blink or blinks rapidly - A
●
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs
P. 360, 361
—
If you remove the key from the ignition
●
switch while the lights are on, a chime
sounds when the driver's door is
opened.
uuIndicatorsu
Message *
—
—
—
—
79