Honda 2012 Odyssey Owner's Manual page 151

uuOperating the Switches Around the Steering WheeluDriving Position Memory System
■
Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
Memory
Button 1
Memory
Button 2
SET Button
150
1. Adjust the driver's seat and the outside
mirrors to the desired position, and turn the
ignition switch to ON w .
(
2. Press the SET button.
uYou will hear the beeper, and the
memory button indicator light will blink.
3. Press and hold memory button
within five seconds of pressing the SET
button.
uOnce the seat and the outside mirrors
position has been memorized, the
indicator light on the button you pressed
stays on.
1. Move the shift lever to P .
(
2. Apply the parking brake.
3. Press a memory button ( 1 or (
uYou will hear the beeper, and the
indicator light will blink.
The seat and the outside mirrors will
automatically move to the memorized
position. When it has finished moving, you
will hear the beeper, and the indicator light
stays on.
*
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the double-
beep.
•
You readjust the outside mirrors.
•
You turn the ignition switch to any position except
( 1 or ( 2
ON .
( w
1Recalling the Stored Position
The seat and the outside mirrors will stop moving if
you:
•
Press the SET button, or a memory button (
( 2 ).
2 ( ).
•
Adjust the seat position.
•
Adjust the outside mirrors.
•
Shift into any position except
( 1 or
( P .