Honda 2012 Odyssey Owner's Manual page 368

Blade
Retainer
Blade
Indent
Tab
uuChecking and Maintaining Wiper BladesuChanging the Wiper Blade Rubber
3. Slide the wiper blade out from its holder by
pulling the tabbed end out.
4. Remove the retainers from the rubber blade
that has been removed, and mount to a
new rubber blade.
5. Slide the new wiper blade onto the holder
from the bottom end.
u The tab on the holder should fit in the
indent of the wiper blade.
6. Slide the wiper blade onto the wiper arm
until it clicks.
7. Lower the passenger side wiper arm first,
then the driver side.
367