Table of Contents
Advertisement
Editing the set phone number
1
M
N#338
2
MbN: "Notification to" a MOKN
3
M
N a MbN: "Edit" a MOKN
4
Edit the name if necessary (16 characters
max.). a MOKN
5
Edit the phone number if necessary (24
digits max.). a MOKN 2 times a MeN
Erasing the set phone number
1
M
N#338
2
MbN: "Notification to" a MOKN
3
M
N a MbN: "Erase" a MOKN
4
MbN: "Yes" a MOKN a MeN
R The new message alert setting is
turned off.
Activating/inactivating the remote
access code to play messages
If you activate this feature, you must enter the
remote access code (page 37) to play the
new message from the new message alert
call. This is so that unauthorised parties
cannot listen to your messages. The default
setting is "Inactivate".
– "Inactivate": You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
– "Activate": You must enter your remote
access code and then press 4 to play new
message.
1
M
N#338
2
MbN: "Remote Code" a MOKN
3
MbN: Select the desired setting. a MOKN
a MeN
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
HNH100E_(en_en)_0421_ver.051.pdf
n When the remote access code is set to
"Inactivate":
Press 4 to play the new message during
the announcement.
n When the remote access code is set to
"Activate":
1
2
Note:
R Within 10 seconds after listening to new
messages, you can press #9 during the
call to turn off the new message alert by a
call feature.
R Even if the unit makes a new message alert
call, the handset redial list does not show
the record.
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit's voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorised
parties from listening to your messages
remotely.
Important:
R In order to operate the answering system
remotely, you must first set a remote
access code.
1
M
2
Enter the desired 3-digit remote access
code.
3
MOKN a MeN
37
Answering System
Enter the remote access code
(page 37) during the announcement.
Press 4 to play the new message.
N#306
2015/04/22
37
19:08:47
Advertisement
Table of Contents
