Table of Contents
Advertisement
FLOOR
1
Press POWER to clean bare floor surfaces, area rugs or areas above-floors. The brushroll will not spin in this mode.
CLEANING
2
Press POWER and BRUSHROLL to clean carpets. The brushroll indicator lights will illuminate GREEN. If there is a jam, the indicator light
on power nozzle will illuminate RED. Refer to MAINTENANCE (page 10) for instructions on removing blockages.
3
Place your foot gently on the power nozzle and tilt the handle back to start cleaning.
Note: The brushroll will only spin once the vacuum is reclined back.
POWER
Bare floor or wand cleaning
OR
1
2
POWER + BRUSHROLL
Carpet cleaning
3
5
Advertisement
Table of Contents
