Cleaning The Hose Filter; Cleaning The Impellers; Lower Impeller - Beko DFC05R10W User Manual

Maintenance and cleaning
4. Clean all three filters under tap water
by means of a brush.
5. Replace the metal/plastic filter.
6. Place the coarse filter into the
microfilter. Make sure that it is properly
seated. Turn the coarse filter clockwise
until a "click" sound is heard.
C
Do not use the dishwasher
without filter.
C
Incorrect placement of the filters
will reduce washing efficiency.

Cleaning the hose filter

Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust, etc.)
can be prevented by means of the filter
attached to the water inlet hose. Check the
filter and the hose regularly and clean them
if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its seat
in the hose.
4. Install the hose to tap.
(depends on model)
Dishwasher / User's Manual

Cleaning the impellers

Clean the impellers at least once a week in
order for the machine operates efficiently.

Lower impeller

Check if the holes on the lower impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. Pull the lower
impeller up to remove it (A, B).
1
A
B
C
25 / 33 EN