Char-Broil 463370108 Product Manual page 21

• Place heat tents over burners by inserting tabs into slots in front of firebox.
10
Opposite ends of heat tents rest on pins in back of firebox.
• Place cooking grates onto grate rests.
11
• Insert ends of Swing Away pivot wire into holes in sides of grill lid. Insert ends of Swing Away leg wire into holes in sides
of firebox. NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg
wires are on top, Swing Away is installed upside-down.
• Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto
ignitor.
Pivot Wire
Swing Away
Leg Wire
+
– Cooking Grate
AA Battery
Pin
463370108 • 21