Table of Contents
Advertisement
Turn the door lock through 180°.
Press the door lock into openings
on the opposite side of the door
opening.
Adjust the position of the door lock
so that the screw holes line up with
those in the front panel of the dryer
.
Secure the door lock with the two
Torx screws.
Installation and connection
3. Remove the lock catch from the
door
First take the rubber seal off the door
and place this to one side.
Use a T20 Torx screwdriver to
remove screw on the lock catch.
Pull off the lock catch together with
lock catch cover .
77
Advertisement
Chapters
Table of Contents
