Miele tmr640wp Operating Instructions Manual page 79

5. Change over the door hinge on the
door
The door hinge is secured to the door
with 2 angled rods. These rods need
to be removed with a screwdriver or
pointed pliers.
 Insert the end of the screwdriver
blade under rod  and rotate it so it
is in an upright position. Do the same
to the other rod.
 Use the screwdriver to guide first one
then the other rod  to the middle
until each can be removed.
Installation and connection
Tip: In some circumstances, the rods
can be difficult to dislodge. Moving the
screwdriver with a levering action while
pulling at the same time may help to
work the rods free.
 Remove the door hinge and turn it
through 180°.
 Refit the door hinge on the opposite
side of the door.
 Secure the door hinge with the two
rods .
 Position the screwdriver under the
end of the rod and then push it into
its resting position .
79