Table of Contents
Advertisement
SHORT CIRCUIT PROTECTION
If the battery pack was to short circuit
the short circuit protector would
immediately stop the battery pack
from operating. This will ensure that
no further internal components of the
battery or the tools are damaged.
TECHNICAL SPECIFICATIONS
SPECIFICATIONS
Product code
Warranty
Voltage
No-load speed
Transmission
Battery type
Max torque
Clutch settings
Chuck size
Chuck type
Battery charge time
8
INTENDED USE
The cordless drill driver is designed to
tighten and undo screws, as well as for
drilling in wood, metal and plastic.
This tool is to be used only for its
prescribed purpose. Any other use
is deemed to be a case of misuse.
The user / operator and not the
manufacturer will be liable for any
damage or injuries of any kind caused
as a result of this.
NG-51 DRILL DRIVER
40040
3 years
12V
0-350 / 0-1250 RPM
2 speed
Li-ion 2000mAh
23N.m
16+1
3/8" (10mm)
Single sleeve chuck
30 mins
Advertisement
Table of Contents
