Philips HD9220/40 Service Manual page 15

DISASSEMBLY- AND RE-ASSEMBLY ADVICE
F. Thermostat removal
1. Follow previous step A
2. Remove the 3 screws G
G
3. Follow previous step B, C, D
By step C do not cut the wires.
Note: be careful with the wire / heating element
connecting, this connection is fragile.
4. Remove the thermostat sensor by undoing the metal band.
Note: Please make sure while re-assembling the new
thermostat that the routing will be done as shown
in below picture.
from the thermostat assy.
G
G
metal band
G. Motor assy removal
1. Follow previous step A, B, C, D
By step C do not cut the wires.
2. Remove the thermostat sensor (See instruction F 4)
3. Remove the fuse and the earth connection from the
double heat shield.
Fuse
Earth connection
4. Cut the motor wires half way and remove the motor fan
assy.
HD9220/40
Double
heat shield
6-9