[H-Offset] / [V-Offset] / [Clock] / [Phase]
You can change the screen settings manually.
[H-Offset]
: horizontal picture adjustment
[V-Offset]
: vertical picture adjustment
: clock adjustment
[Clock]
[Phase]
: phase adjustment
2
Use ▲ / ▼ to select the item you want, then
press OK, and then appear the setting display,
adjust the setting using ◄ / ►.
• While adjusting each setting, you can change the setting
item using ▲ / ▼.
Picture Adjustment
You can adjust the picture settings according to your
personal preference. These settings are automatically
stored after exiting the picture menu.
1
Use ◄ / ► to select [PICTURE].
PICTURE
Move
[Picture Mode]
You can change the picture adjustment style.
2
Use ▲ / ▼ to select [Picture Mode], then press
OK.
3
Use ▲ / ▼ to select [Dynamic], [Standard],
[Mild] or [Personal], then press OK.
: higher contrast
[Dynamic]
: standard
[Standard]
: lower contrast
[Mild]
: manual setting
[Personal]
• You can change picture mode easily using P MODE on the
Remote Control. Press P MODE repeatedly to select the
picture mode you want. In this function, you can also assign
the picture mode individually to each input mode.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temperature
Noise Reduction
Dynamic Contrast
Menu
Enter
[Contrast] / [Brightness] / [Color] / [Tint] /
[Sharpness]
You can change the screen settings manually.
While adjusting each setting, you can change the
setting item using ▲ / ▼.
[Contrast]
[Brightness]
[Color]
[Tint]
[Sharpness]
2
Use ▲ / ▼ to select the item you want. Then
press OK, and the setting display will appear.
3
Adjust the setting using ◄ / ►.
• You can adjust the settings, if you set [Personal] in
[Picture Mode].
[Color Temperature]
You can change the color tone of the picture.
2
Use ▲ / ▼ to select [Color Temperature], then
press OK.
Standard
3
Use ▲ / ▼ to select [Cool], [Medium] or
50
50
[Warm], then press OK.
50
50
30
[Cool]
Medium
Middle
[Medium]
Off
[Warm]
[Noise Reduction]
You can reduce picture noise.
Exit
2
Use ▲ / ▼ to select [Noise Reduction], then
press OK or ►.
3
Use ▲ / ▼ to select [Off], [Low], [Middle] or
[High], then press OK.
[Dynamic Contrast]
You can set the dynamic contrast mode.
2
Use ▲ / ▼ to select [Dynamic Contrast], then
press OK.
3
Use ▲ / ▼ to select [On] or [Off], then press OK.
: contrast adjustment
: brightness adjustment
: colorfulness adjustment
: redness/greenness adjustment
: sharpness adjustment
: bluer tone
: average tone
: redder tone
19