Detail Settings; Channel Settings; Screen Settings - FUNAI 100FD714 Instruction Manual

DETAIL SETTINGS

Read this first
Before adjust each setting, press MENU to display the
menu.
To exit the menu, press EXIT.

Channel Settings

You can edit the channel settings.
1
Use ◄ / ► to select [CHANNEL].
CHANNEL
Move
[Auto Tuning]
You can scan the channels in your area automatically.
2
Use ▲ / ▼ to select [Auto Tuning], then press
OK to start scanning.
• When the scanning is completed, the lowest memorised
channel will be displayed.
• If you press MENU during the scanning, this operation will
be stopped and a confirmation display will appear, then you
can cancel scanning.
[ATV Manual Tuning]
You can search channels manually in your area.
2
Use ▲ / ▼ to select [ATV Manual Tuning], then
press OK.
3
Use ▲ / ▼ to select [Current CH], then use ◄ /
► to select the channel you want.
4
Use ▲ / ▼ to select [Color System], then use ◄
/ ► to select the system you want.
5
Use ▲ / ▼ to select [Sound System], then use
◄ / ► to select the system you want.
6
Use ▲ / ▼ to select [Fine Tune], then use ◄ / ►
to adjust the setting.
7
Use ▲ / ▼ to select [AFC], then use ◄ / ► to
select [On] or [Off].
• If you set to [On], this unit searches a near channel
automatically.
18
Auto Tuning
ATV Manual Tuning
Programme Edit
Menu Enter
8
Use ▲ / ▼ to select [Search], then use ◄ / ► to
search a channel.
[Programme Edit]
You can edit the programme settings.
2
Use ▲ / ▼ to select [Programme Edit], then
press OK to enter Programme Edit list.
[Delete] (RED) :
Press RED to delete the current channel.
[Rename] (GREEN) :
Press GREEN and use ▲ / ▼ / ◄ / ► to change the
current channel name.
[Move] (YELLOW) :
Press YELLOW and use ▲ / ▼ to move the current
channel.
[Skip] (BLUE) :
Press BLUE to skip the current channel.
[FAV] (FAV) :
Press FAV to register the current channel.
Exit

Screen Settings

If your PC is connected with this unit, you can edit the
screen settings.
1
Use ◄ / ► to select [SCREEN].
[Auto Adjust]
You can change the screen settings automatically.
2
Use ▲ / ▼ to select [Auto Adjust], then press
OK.
Auto Adjust
H-Offset
V-Offset
Clock
Phase
SCREEN
Move Menu
30
30
30
0
Enter Exit