Assembly Instruction - Heartway Medical Products HP7K User Manual

ASSEMBLY INSTRUCTION
1.Installing the Front Light on the Seat
Turn the seat (#2) over. Insert the Front left light w/bracket (#8) on the seat frame.
(See Fig 2) Insert the bolts and washer with the nuts into the holes of the seat frame.
, then use the wrench and Allen Key to tighten the light frame (See Fig 3). Plug the connector of the
harness of light (Fig 4). Please do the same step to assemble the right light frame. (See Fig 5)
Connection point
Front connection point
(Fig 2) (Fig 3)
Armrest frame
Front Light Connectors
(Fig 4) (Fig 5)
2. Installing the Seat (#2)
Slide the seat set (#2) into the connection points (both sides) in the Main frame (#1)(See Fig 6), put
down the reclining back set and connect the front connection point and make sure that tighten the
tension knob in the front connection point. (See Fig7)
7