Operation - Heartway Medical Products HP7K User Manual

OPERATION

The power wheelchair is simple to operate. However , we recommend that you read carefully the
following instructions to become familiarized with your new vehicle.
A Word of Caution:
Before you turn the power on, always be aware of the environment that surrounds you to select your
desired speed. For indoor environments we recommend that you select the slowest speed setting. For
outdoor operation of this vehicle we recommend that you select a speed that is comfortable for you
to control it safely.
The following steps are required to operate your vehicle safely with the controller (See Fig 16)
ON/OFF
Left Signal Button
A. Driving:
1.Controller ON/OFF Switch
Press the ON/OFF button (I/O) switch located in front of the joystick to activate your power
wheelchair. The battery condition meter will light up to indicate the current charge of your
battery. Pressing the ON/OFF button again will deactivate the controller.
2.Speed Control
The speed control buttons allow you to set the forward speed to yours desired setting. Pressing
the speed increasing button will set the speed at the faster settings while the speed will slow
down if you press the speed decreasing button. The controller sets the reverse speed,
acceleration and deceleration proportion-
Battery Condition Meter
SPEED CONTROL
Right Signal Buttom
12
(Fig 16)