Set The Root Password; Camera Orientation - Axis M3027-PVE User Manual

AXIS M3027-PVE Fixed Dome Network Camera
Access the Product

Set the Root Password

To access the Axis product, you must set the password for the default administrator user root. This is done in the Configure Root
Password dialog, which opens when the product is accessed for the first time.
To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPS
certificate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic between web browsers and servers. The
HTTPS certificate ensures encrypted exchange of information. See HTTPS on page 48.
The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be
reset to the factory default settings. See Reset to Factory Default Settings on page 59.
To set the password via a standard HTTP connection, enter it directly in the dialog.
To set the password via an encrypted HTTPS connection, follow these steps:
1. Click Use HTTPS.
A temporary certificate (valid for one year) is created, enabling encryption of all traffic to and from the product, and the
password can now be set securely.
2. Enter a password and then re-enter it to confirm the spelling.
3. Click OK. The password has now been configured.

Camera Orientation

This setting is defined the first time the product is accessed. Depending on how the Axis product is installed, select ceiling, wall
or desktop .
Your selection will affect the view mode settings in the product (see the table below for an overview of the view modes available for
the different camera orientations). For information about view modes see View modes on page 17.
Overview
Panorama
Double Panorama
Quad View
View Area 1
View Area 2
View Area 3
View Area 4
Panorama Corner Left
Panorama Corner Right
Double Panorama Corner
To change these settings, the product must be restored to the original factory default settings. To reset or restore the product, go to
Setup > System Options > Maintenance in the product's web pages. For information about reset and restore, see Maintenance on
page 57.
Ceiling
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Wall
✓
✓
—
—
✓
✓
✓
✓
—
—
—
10
Desktop
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓