Ivr Functions Table - D-Link DVG-7111S User Manual

Voip telephone adapter
Hide thumbs Also See for DVG-7111S:
Table of Contents

Advertisement

DVG-7111S User's Manual
a new IP address) enter 192*168*1*2 (new IP address).
Save Settings
When all setting procedures are completed, dial 509 (Save Settings) from phone keypad. Wait for about
three seconds, you should hear a voice prompt "1 (one)." You can now hang up the phone and please
reboot the VoIP TA to enable the new settings.
To inquire about the current VoIP TA WAN Port IP address setting
After completing all your settings, dial 101 from the keypad, then you can hear the system play back the
current WAN Port IP address. If the system does not play back the IP address after dialing 101, this
indicates that the VoIP TA currently is not connected to the Internet. Please check and make sure the
cable connections, account numbers, and passwords are correct.
4-1-1

IVR Functions Table:

Function
Description
Code
111/101
WAN Port IP address Set/Query
112/102
WAN Port Subnet Mask Set/Query
113/103
WAN Port Default Gateway Set/Query
114/104
Current Network IP Access Set/Query (1: Static IP, 2: DHCP, 3: PPPoE)
115/105
DNS IP address Set/Query
116/106
Phone Book manager IP address Set/Query
117/107
Set/Query whether or not to use a Public Telephone Book
(0: Disable 1: Enable)
199/099
Set/Query whether or not this VoIP TA acts as the Phone Book manager
(0: Disable 1: Enable)
066
Querying the connection to Phone Book manager
118
Restart
121
Setup PPPoE Account
122
Set PPPoE Password
123
Set NAT IP address
124
Uses NAT (0: Disable 1: Enable)
311/301
LAN Port IP Set/Query
312/302
LAN Port Subnet Mask Set/Query
109
Restore factory default IP address configuration
409
Restore factory default settings
509
Save settings
900
Set the IVR and the language used on the Web GUI
(1: English, 2: Traditional Chinese, 3: Simplified Chinese)
209
Software Upgrade
D-Link Systems, Inc.
VoIP Router Configuration-IVR
Example / Notes
Dial function code 114 and then dial
1 for a Static IP connection then
setup the IP address.
Dial function code 114 and then dial
3 for a PPPoE connection.
A static IP address for WAN Port
IP:192.168.1.2
Mask:255.255.255.0
Gateway:192.168.1.254
87

Advertisement

Table of Contents
loading

Table of Contents