D-Link DVG-7111S User Manual page 35

DVG-7111S User's Manual
Calling Feature Instructions:
Call Hold: The call will be held after the FLASH button is pressed on the phone set. The VoIP TA will
play a hold music (provided by your VoIP Service Provider) to the remote end.
Call Transfer: The call will be held after FLASH button is pressed on local phone set (the VoIP TA plays
on-hold music to the remote end). Meanwhile, the local user can dial out another number after the dial
tone is heard. After the handset is on-hooked, the call originally on hold will then be transferred to the
new number regardless the status of the new call. If wrong number is dialed for the new call, press the
FLASH button will switch back to the call on hold. Also, if the local user doesn't hang up the phone after
the new call is set up, press the FLASH button will switch between the original call and the new call.
Please note that the PBX between phone sets and the VoIP TA must support FLASH features in order
to use this function. If a phone set is connecting directly to the FXS port of the VoIP TA and the FLASH
button does not function, please adjust the settings in "Flash Detect Time" from "Advanced Options"
section.
Note: The availability of the above features also depends on your VoIP Service Provider. Please also
check with your service provider for these services.
Examples of establishing a Three-Way call:
1. Phone1 dials to Phone2, Phone2 answers the call.
2. Phone1 presses Flash then calls Phone3 (Phone2 is on hold) and Phone3 answers the call.
3. Phone1 dials *61 and then presses Flash to start the conference call.
Or
4. Phone1 dials to Phone2, Phone2 answers the call.
5. Phone3 dials to Phone1 (Call Waiting), Phone1 presses Flash to pick up the second call and talk
to Phone3.
6. Phone1 dials *61 and then presses Flash to start the conference call.
Note: The availability of a Three-Way call also depends on your VoIP Service Provider. Please also
check with your service provider for these services.
D-Link Systems, Inc.
ADVANCED
35