Adding A Point To A Route; Taking A Detour; Stopping The Route; Using Suggested Routes - Kenwood DNX892 Instruction Manual

Navigation

Adding a Point to a Route

1 While navigating a route, select
return to the main menu.
2 Select Where To?.
3 Search for the location
4 Select Go!.
5 Select Add to Active Route.

Taking a Detour

While navigating a route, you can use detours
to avoid obstacles ahead of you, such as
construction zones.
⁄
• If the route you are currently navigating is the only
reasonable option, your device might not calculate a
detour.
From the map, select

Stopping the Route

From the map, select
18 GPS Navigation Instruction Manual
to
(page 12).
> Detour.
.

Using Suggested Routes

Before you can use this feature, you must save at
least one location and enable the travel history
feature (page 15).
Using the myTrends feature, your device predicts
™
your destination based on your travel history, the
day of the week, and the time of day. After you
have driven to a saved location several times, the
location may appear in the navigation bar on the
map, along with the estimated time of travel, and
traffic information.
Select the navigation bar to view a
suggested route to the location.

Using Exit Services

⁄
• You must be on a major highway or road to use Exit
Services.
While navigating a route, you can find gas, food,
lodging, and restrooms near upcoming exits.
Services are listed under tabs by category.
Gas
Food
Lodging
Restrooms

Finding Exit Services

1 From the map, select
2 Use the arrows to select an upcoming exit.
3 Select an exit service tab.
4 Select a point of interest.
> Exit Services.