Function Of Each Button - LG WF-S170V Owner's Manual

Function of each Button

Display laundry progress
• Laundry progress is indicated
here.
• Process to be done will have
light on. Process in progress
will blink and process already
done will have light off.
Time Delay (Reservation)
button
• Use for laundry
reservation.
• To cancel, turn power
off. (refer to page 26)
Steam button
• Use for steam.
• Steam can be selected
under Normal,
Whitening, Favorite
course.
• Steam is automatically
selected under Allergy
care course.
Water wave button
• To control water wave.
• Initially set at "medium"
but will not be indicated.
To control Strong wave
power, press Strong
wave. (all course except
Allergy Care, Delicates
and Tub Clean can
adjust wave.)
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8min-
utes at maximum and decreased by 4 minutes at maximum.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The steam option cannot be used with all cycles.
* Steam may not be clearly visible during the steam cycles.
This is normal. Too much steam could damage clothing.
14
Display remaining time, reservation time, and alarm for trouble
• During operation this indicates time to finish of laundry.
ex) indicates remaining time of laundry, rinse, spin
dry during operation/pause.
• If there is a trouble, it blinks with buzzer sound and indicates
the source of trouble. It will work normally after
troubleshooting.
Buzzer Button
• Pressing the
• Use this when you
button allows
want to dry the empty
OFF ON.
tub after a wash.
Tub Dry Button Water Level button
(display detergent amount)
• Use to adjust Water Level.
• It can be changed during
operation.
• Add detergent as much as
indicated amount next to
Water Level.
• Detergent is based on
condensed detergent.