Fixture Cleaning; Technical Specification - Beamz 150.682 Instruction Manual

Fan timing function: Temperature: 40°~ 60°, fans start to work, from slow to fast, the temperature higher, the fans
speed will be faster. When temperature reach to 60°, the fans will work in full speed, and it will stop working when
temperature ≤35°
Power reduction: When the fans work in full speed, if the temperature still keeps on increasing, for every degree
increased, the power will be reduced 5%. The light will be off when temperature reach to 68°, and it will continue to
work only when the temperature ≤60°.

FIXTURE CLEANING

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly
dirty surrounding can cause greater accumulation of dirt on the unit's optics.

Make sure the area below the installation place is free from unwanted persons during servicing

Housings, fixations and installations spots( ceiling, truss, suspensions) should be totally free from any
deformation

The mains cables must be in impeccable condition and should be replaced immediately when even a small
problem is detected

In order to protect the fixture from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.

The interior of the fixture should be cleaned annually using a vacuum cleaner or air-jet.

Clean with soft cloth using normal glass cleaning fluid.

Always dry the parts carefully.

Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
ATTENTION: We strongly recommend internal cleaning to be carried out by qualified worker!

TECHNICAL SPECIFICATION

Rated voltage
Rated power
LED
Control Signal
Channel
Function
Dimensions per unit
Weight (per unit)
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can
be changed without prior notice.
10
240-247 Random Strobe
248-255 Light on
: AC100～240V 50/60Hz
: 50W
: 5pcs 10W RGB 3in1 LEDs
: DMX signal
: 1,3,5,7,15,18 DMX Channels
: DMX, Auto, Sound active
: 62 x 15 x 16cm
: 3.5 kg